Product Features

• Battery Eliminator Circuit (BEC): eliminates receiver battery
• Safe "Power On"
• Low torque "Soft Start": protects gear boxes and belt drives from shock
• Simple setup: no complicated switches or wiring
• Tough surface mount construction
• Smooth reverse exponential throttle
• Audible Arming Signal
• Self-calibrating endpoints: maximizes usable stick travel
• Auto Motor cut-off with reset
• Auto shut-down when signal is lost
• Microprocessor Controlled

An updated version of our original Pixie-7, the Pixie-7P provides modelers flexibility through the use of user-programmed features. Using an on-board LED and your throttle stick, you decide the cut-off voltage, motor cut-off, and throttle range options on this ESC!

The Pixie-7P can be used with Speed-280 and smaller motors where current draw will be 7 amps or less. It comes with custom-made 24 gauge silicone wire for battery and motor leads.

The Pixie-7P can be set up for lower cut-off voltages for 3 or 4 cell NiCad packs, higher cut-offs for lithium cells or 10-16 cell NiCad packs, or no cut-off for micro helis. The unit comes pre-programmed for standard 5-10 cell aircraft operation (4.7V cut-off).