Product Features- Ready-to-fly 3D performance right from the box
- Reusable ZX10 72MHz radio system including digital, metal gear 3-wire servos for precise control and fast response
- 3-cell 1800mAh Li-Po battery included with variable rate balancing charger
- BL400-15T gear-reduced, brushless motor with E-flite® 30-amp Pro Brushless ESC
- Dual metal gear, digital aileron servos
- Optional Side Force Generators™ included for improved stability and response in knife-edge fight
- Large control surfaces for maximum 3D performance
- Dual flight modes (High and Low Rate)
- PNP version also available (PKZ4375)
ParkZone’s Charge-and-Fly™ Typhoon™ 2 3D is for experienced RC pilots who want the thrills of unlimited action in an electric park flyer without the hassles of building one. Equipped with oversized control surfaces and a powerful ParkZone™ BL400-15T brushless motor and digital metal gear servos, it can perform the most aggressive 3D maneuvers imaginable with laser precision and power to spare. Hovers, harriers, torque-rolls, waterfalls—the Typhoon 2 does them all. The removable side force generators can be attached with just eight screws. And because the wings and fuselage are molded from ParkZone’s super-strong, feather-light Z-foam™ material, it can handle the punishment of these high-energy 3D aerobatics without getting bent out of shape.
Getting the Typhoon 2 airborne is about as simple as it gets. Everything you need is in this box. Just attach the wing, tail and landing gear, charge up the included Li-Po battery pack and in as little as 40 minutes, you’re flying. Once in the air you can choose between Low and High Rate with a flip of the transmitter switch.
Warning: Never plug the balance lead of your LiPO flight battery directly into the receiver. Doing this will likely result in permanent damage to the receiver and to the battery.
Wingspan: 39.4 in (1000mm)
Overall Length: 36.6 in (935mm)
Flying Weight: 26 oz (740 g)
Motor Size: BL400-15T brushless, gear reduced
Radio: 72mHz 5+ channel FM proportional ZX10
Servos: Four 3-wire digital servos
Trim Scheme Colors: White fuselage and wing with purple, yellow and black decals
CG (center of gravity): Approx. 3.5" (89mm) back from the leading edge of the wing.
Prop Size: 13.5 x 7 and 12 x 8.75 (both included)
Speed Control : E-flite® 30A Pro Brushless ESC with Switch Mode BEC (EFLA1030)
Recommended Battery: 3-cell 1800mAh Li-Po battery ((PKZ1031)included)
Aileron: Proportional
Elevator: Proportional
Rudder: Proportional
Throttle: Proportional
Approx. Flying Duration: 12-15 minutes on 1800mAh Li-Po
Approx. Assembly Time: 15 minutes
Gear Ratio: 8:1
Available Frequencies: Channels 17 (72.130), 19 (72.170), 21 (72.210), 50 (72.790), 52 (72.830) and 54 (72.870)
X-Port: No
Charger: 2-3 cell DC Li-Po charger
Landing Gear: Steerable tail wheel, Wire gear, Foam wheels
View Image Gallery
Typhoon 2 3D (QuickTime Dial-Up) (3.5 MB)
Typhoon 2 3D (QuickTime Broadband) (5.9 MB)
New Releases at the 2007 Toledo RC Show (Article)
New Releases at the 2007 Toledo RC Show (Article)
Wireless FS One, Simply Put it in a Bind (Article)
How to Repair Your ParkZone Trojan or Corsair (Article)
Holiday Gift Guide 2008: Top Planes (Article)
Review: ParkZone's F4U Corsair RTF/PNP (Article)
Preview: ParkZone's F4U Corsair RTF (and PNP) (Article)
Micro Cessna Damaged? Fix It, It’s Fun! (Article)
ParkZone Etomic Series (Article)
ParkZone Cessna Centurion, A Little Idea (Article)
Typhoon 2 3D Instruction Manual - English-only (Manual, 1.6 MB)
Accessories Chart (Manual, 92 KB)
|