|
Product Features- Same mounting dimensions as O.S. 91 Surpass
- Baked on, gloss-black finish and shiny gold valve covers.
- 1.00-size in a .91-size case.
The FA-91 is one of the most popular selling engines in Saito's extensive line of four-strokes. The .91 fits perfectly into most airplanes designed for .60-size two-strokes offering the ability to swing larger diameter props with more thrust than the two-stroke. Many pilots simply prefer the powerful sound of a four-stroke. Now Saito™ is offering a new engine that offers even more power than the .91 but that's similar in size and weight.
The FA-100 will turn an APC 14 x 8 prop 300 to 700 rpm more than either the Saito .91 or O.S. .91. At only 19.2 ounces (less muffler), it weighs nearly 2 ounces less than the O.S as well! The Saito FA-100 is not just a punched out .91. It features a newly tooled case that shares the mounting dimensions of the O.S. 91. This allows it to be used with the many after-market engine mounts already available to fit this engine.
The Saito 100 idled and transitioned beautifully from the first start due to the included new Hangar 9® Super Plug (HAN3011) that now comes with all Saito engines. This plug greatly improves idle and transition in all four-stroke engines. After a short slightly rich break-in, we peaked the needles at 3-5/8" out on the high-speed and a ¼ turn in from flush on the low-speed needle.
Our staff commonly uses 30% heli fuel in Saito engines, as it not only gives better top-end performance but it runs smoother, gives a better transition, and runs cooler.
In flight the FA-100 was one smooth operator. Transition and idle were clean and crisp with instantaneous response. No dead sticks occurred in the first six test flights, despite purposefully long high-altitude idles, followed by rapid full-throttle transitions. The 30% helicopter fuel gave a noticeable boost in power, plus the added oil in the fuel adds a nice trail of smoke.
If you're looking for a powerful lightweight four-stroke to power your latest .60 through .90-size project, you don't have to settle on a 91. Check out Saito's new FA-100.
Muffler Type: Cast
Mounting Dimensions: 115 x 60 x 128 mm
Fuel: 10% - 30% Synthetic
Benchmark Prop: 14 x 8 APC
Total Weight: 21.1 oz
Cylinders: Single, Chrome Plated
Type: 4-stroke
Displacement: 1.10 cu in (17.10 cc)
Bore: 1.14 in (29.0mm)
Stroke: 1.02 in (26.0 mm)
Engine (Only) Weight: 19.5 oz
Muffler Weight: 1.6 oz
Crankshaft Threads: M8x1.25mm
Prop Range: 13 x 9 - 14 x 10
RPM Range: 2,000 - 11,000
Cylinder Type: AAC
The Sounds of Saito (Article)
Saito G36 Gas + Hangar 9 P-51 1.50 = YES (Article)
Put a Radial Engine in your Sopwith Camel (Article)
Saito FA-40a (Article)
Saito 4-Stroke Myth (Article)
Torque Rolling 101 (Article)
Saito Small to Medium Single Cylinder Engine Manual (Manual, 1.7 MB)
Saito FA-100 (Parts Explosion, 387 KB)
|
|
|
|
|
Product Information
|
Product Features
Overview
Tech Notes
Specifications
Articles, Reviews, and Links
Manuals
Parts Explosions
Warranty
Supporting Products
Parts Listing
Optional Accessories
Similar Categories
Engines - Airplane Engines, 2 Cycle, Airplane Engines, 4 Cycle, Airplane Engines, Control Line Gas Engines, Airplane
More Engines, 4 Cycle, Airplane by:
Saito Engines YS Parts and Service
|
|
|
|
|
+'&Caption=100+Golden+Knight+AAC+with+Muffler%3A+UU&Title=100+Golden+Knight+AAC+with+Muffler%3A+UU', 600, 500);){kind=link}